Ba15s LED lamp red 10/30 volt use.
These BA15S LED bulbs can be replaced for your original 1156 R5W, R10W and P21W halogen bulb (photo 2). The light output of this BA15S LED lamp can be compared with a P21W halogen lamp. This allows you to use these LED lamps, for example, if you use the interior lighting of your car, truck, tractor or camper. You could also use these lamps in the rear lights of your trailer or trailer.
The BA15S LED lamp red is active from 10 to 30 volts. This allows you to mount this LED lamp in your interior lighting of, for example, your car, truck, tractor, trailer, camper / caravan or boat. Because these lamps work up to 30 volts, they are protected against peak voltage that can arise when starting your vehicle. The lamp connection of this lamp is 15 millimeters at the bottom, hence the name BA15S.
The dimensions of this red BA15S LED lamp with 9-SMD are as follows:
- Length: 39 mm
- Width top: 20 mm
- Bottom width: 15 mm
Please note, these LED lamps are not CAN-Bus proof, this means that this lamp can report a defective lamp on your dashboard. This mainly applies to newer models of cars, trucks are often excluded.
Other available colors:
Is this red BA15S LED lamp not what you are looking for? Then know that these are also available in the following colors:
Why does this BA15S LED lamp not have an E-mark:
Replacement lamps must meet European standards for safety, water tightness and short-circuit prevention (ECE-R37). These standards are based on the incandescent and halogen lamp of the past. LED replacement bulbs cannot meet those standards because there is no filament in them. As a result, they do not receive the E-mark R37 and may therefore not be used officially on public roads. As a user, you can be fined by the police during a check even though your vehicle is MOT approved with this lamp. You should be allowed to use these lamps on private property or in racing.