T10 LED warm white 24V (10 pieces)
Beschikbaarheid: In stock
| ordered before 15:00, shipped today |
€13,85 Excl. VAT €16,76 incl. 21% VAT
T10 LED lamp warm white - 3000K, suitable for 24 volt use.
Are you looking for a budget-friendly LED lamp that you can exchange for your original mounted T10 halogen lamp? Then this warm white T10 LED lamp may be the lamp you are looking for. The LED lamp is equipped with 5 LED's and is supplied per set of 10 pieces. The 5 LEDs ensure that the lamp will shine all around. This LED lamp has a light output that you can compare with a 5 watt halogen lamp. The T10 LED lamp warm white can only be used on 24 volts. This means that you can use this LED lamp for example in your truck, camper or trailer. To ensure that the warm white LED lamp fits, the original lamp fitted should be the same as that shown in picture 3. If it does not match, the LED lamp will probably not fit.
To make sure that this T10 LED lamp warm white is suitable for your vehicle or trailer, we have written a number of specifications below. All this to make it clear to you why this might be the T10 LED lamp you are looking for. This LED lamp has, among other things, the ECE R10 quality mark. This quality mark means that the lamp will not cause any interference during activation, for example on your radio signal. The LED lamp can also be used up to 28 volts, which means that the LED lamp is protected against peak voltage that can occur when starting your vehicle. In short, this is a great LED replacement lamp white that can serve as side light or interior lighting of your truck or trailer.
Installation of the T10 LED lamp:
To install this T10 LED lamp warm white 24v, you must follow the following steps:
- Switch off the lighting of your vehicle.
- Take out the old 5W5 (image 3) halogen bulb.
- Place the T10 LED lamp warm white in the holder.
- Switch on the lighting of your vehicle and check if the LED lamp works. The lamp does not work? Then turn it a quarter turn.
- The lighting is now ready for use.
Please note, these LED lamps are not CAN-Bus proof. This means that this lamp can report a defective lamp on your dashboard. This mainly applies to newer models of cars, trucks are often excluded. Additional lamps such as spotlights or skylights are also excluded from the CAN-Bus system.
Would you like to take advantage of the advantage packaging? But isn't the T10 lamp in the color warm white what you are looking for? View the other available colors below:
- Value pack T10 clear white 24 volt
- T10 value pack amber 24 volt
- Value pack T10 blue 24 volt
- T10 value pack green 24 volt
- Value pack T10 red 24 volt
Why does this T10 LED lamp not have an E-mark:
Replacement lamps must comply with European standards regarding safety, watertightness and the prevention of short circuits (ECE-R37). These standards are based on the incandescent and halogen lamps of the past. LED replacement lamps cannot meet those standards. The reason is because there is no filament in it. As a result, this LED lamp does not receive the ECE R37 quality mark and can therefore officially not be used on public roads. You can use this 24v T10 LED lamp warm white, for example, on your own terrain or in racing.
3000K (warm white)
|Type of lighting||
Interior lighting, License plate lighting, Sidelight
|Number of LED's||
Er zijn nog geen beoordelingen.