{"id":66565,"date":"2022-12-27T20:35:46","date_gmt":"2022-12-27T19:35:46","guid":{"rendered":"https:\/\/www.alldayled.com\/product\/strands-kabel-kit-met-1x-dt2-stekker-12v\/"},"modified":"2022-12-27T20:35:46","modified_gmt":"2022-12-27T19:35:46","slug":"strands-kabel-kit-met-1x-dt2-stekker-12v","status":"publish","type":"product","link":"https:\/\/www.alldayled.com\/en\/product\/strands-kabel-kit-met-1x-dt2-stekker-12v\/","title":{"rendered":"Strands cable kit with 1x DT2 plug 12V"},"content":{"rendered":"

Strands cable kit with 1x DT2 plug, suitable for 12 volt. <\/strong><\/span><\/p>\n

Have you bought a lamp with a DT2 connection and want to use it with a pre-wired switch? Then the Strands cable kit with 1x DT2 plug might be exactly what you’re looking for. The VDE cable is 3 meters long and equipped with one DT2 plug at the end. The fully waterproof Strands cable kit contains a 12V – 40A relay and is therefore suitable for 12 volt. This means you can use the cable kit on your car, trailer, tractor, or other vehicle. Note: if you replace the relay with a 24V variant, you can also use the cable kit for your truck, for example. <\/span><\/p>\n

To make sure the Strands cable kit with 1x DT2 plug is suitable for your vehicle or trailer, we’ve listed the main specifications below. This way you can immediately see why this might be the cable kit you’re looking for. The connection cable has a 1.5 mm\u00b2 cable thickness. This allows you to connect a lamp up to 145W. If you remove the DT2 plug, you can even connect up to 360W. <\/span><\/p>\n

Other Cables: <\/strong><\/span><\/h5>\n

Are you looking for a connection cable, but the Strands cable kit 1x DT2 plug isn’t what you need? Then check out the other cables that Strands offers here: <\/span><\/p>\n