T10 LED lamp white 9/32V – 2 pieces

T10 LED lamp white 6000k, suitable for 12 & 24 volt use.

Are you looking for a bright and good 6000K white LED lamp that you can swap for your original T10 halogen lamp? Then this T10 LED lamp white might be exactly what you’re looking for. The lamp has 5 LEDs and comes in a set of 2 pieces. Thanks to the 5 LEDs, the lamp shines all around and provides a light output comparable to a 10W halogen lamp. The T10 LED lamp works on 12 & 24 volts. This means it’s suitable for your car, truck, or other vehicle. Note: to fit, the original lamp must be the same as shown in image 4. If this doesn’t match, the LED lamp won’t fit.

To make sure this T10 LED lamp white is suitable for your vehicle or trailer, we’ve listed the main specifications below. This way, you can immediately see why this might be the T10 LED lamp you’re looking for. The lamp has the ECE R10 certification, which means it doesn’t cause interference with, for example, your radio signal. Moreover, the LED lamp can be used up to 32 volts, making it protected against voltage spikes when starting your vehicle. In short, this LED lamp is perfect as a city light or for interior lighting of your car or truck.

Please note, these LED lamps are not CAN-Bus proof. This means that this lamp may cause a faulty lamp notification on the dashboard. This mainly applies to newer car models; trucks are often excluded from this. Additional lamps such as spotlights or skylights are also excluded from the CAN-Bus system.

Other colors:

Are you looking for a W5W LED lamp, but the white variant isn’t the color you want? No problem! This plug-in LED lamp is also available in the following colors:

• Plug-in LED lamp warm white 12/24v
• Plug-in LED lamp orange 12/24v
• Plug-in LED lamp blue 12/24v
• Plug-in LED lamp red 12/24v

Why Does this T10 LED Lamp not Have E-Mark:

Replacement lamps must comply with European standards for safety, water resistance, and short circuit prevention (ECE R37). These standards are based on old incandescent and halogen lamps. LED replacement lamps cannot comply with this because they don’t have a filament. As a result, this LED lamp doesn’t receive the ECE R37 certification and officially cannot be used on public roads. You can safely use this T10 LED plug-in lamp on your own property or, for example, in racing. This way, you get the most out of the lamp without causing legal issues.