Strands Siberia cable kit with 1x DT4 connector 12V

Strands Siberia cable kit with 1x DT4 connector, for 12 volt.

Did you buy a lamp with a DT4 connection and do you want to use it via a pre-wired switch? Then the Strands cable kit with 1x DT4 connector might be exactly what you are looking for. The VDE cable is 2.5 meters long and has one DT4 connector at the end. The fully waterproof Strands cable kit contains a 12V – 30A relay and is therefore suitable for 12 volts. This means that you can use the cable kit on your car, trailer, tractor or other vehicle. Please note: if you replace the relay with a 24V version, you can also use the cable kit for, for example, your truck.

To be sure that the Strands cable kit with 1x DT4 connector is suitable for your vehicle or trailer, we have listed the most important specifications below. This way you can immediately see why this might be the cable kit you are looking for. The connection cable is equipped with 1.5 mm² cable thickness. This allows you to connect a lamp up to a maximum of 145W. If you remove the DT4 connector, you can even connect up to a maximum of 360W.

Other Cables:

Are you looking for a connection cable from Strands, but the cable kit with 1x DT4 connector is not what you are looking for? Then view the other cables that Strands offers here:

• Cable kit with 3* DT connector

Do you still think that the Strands Siberia cable kit with 1x DT4 connector is not what you are looking for? Simply because the connector, voltage or cable length is not to your liking? Then be sure to take a look at our page fittings and cables. You may find the fitting or cable you are looking for here.