Festoon LED light 36mm 24V white

Festoon LED light white (6500K) 36mm 24v with 6-smd, for 24 volt use.

Are you looking for an LED light that you can exchange for your original festoon halogen lamp? Then this white festoon LED light 36mm may be exactly what you are looking for. The light has 6 bright LEDs and is supplied in sets of 2. Moreover, the light output is comparable to a 10W halogen lamp. Please note: the 36mm festoon LED festoon light 36mm white only works on 24V. This means that you can use it, for example, in your truck, camper or trailer.

To ensure the light fits, the original light must be the same as in image 3. Doesn’t it match? Then unfortunately, the LED tube light won’t fit. To give you a clear picture of this LED light, we have listed the main specifications below. The light is equipped with the ECE R10 mark, meaning it doesn’t cause interference with, for example, your radio signal. Moreover, the light can handle up to 30 volts, protecting it against voltage spikes when starting your vehicle.

Dimensions:

To be sure that you can easily mount the festoon LED festoon light 36mm white 24 volt, we have listed the dimensions for you below. The dimensions of this white LED light with festoon connection are as follows:

• Length: 36 mm
• Width: 14 mm

Note, these LED bulbs are not CAN-Bus proof. This means that this bulb can trigger a defective bulb warning on your dashboard. This mainly applies to newer car models, trucks are often excluded from this. Also, additional lights such as spotlights or skylights are excluded from the CAN-Bus system.

Other colors:

Are you looking for a festoon LED light, but the LED festoon light 36mm white for 24 volt use is not the color you are looking for? Don’t worry! This LED light with festoon connection is also available in the following colors:

• LED festoon light 36mm warm white
• Tube light 36mm blue
• Tube light 36mm green
• Tube light 36mm red

Why doesn’t this festoon LED light have an E-Mark:

Replacement lights must comply with European standards for safety, water resistance, and short circuit prevention (ECE R37). These standards are based on old incandescent and halogen lights. LED replacement lights cannot comply with this because they don’t have a filament. As a result, this LED light doesn’t receive the ECE R37 certification and officially cannot be used on public roads. You can safely use this BA15S LED light on your own property or, for example, in racing. This way, you get the most out of the light without causing legal issues.