BA15S LED bulb warm white 10/30V – 2 pieces

BA15S LED bulb warm white 3000K with 9-smd, for 12 & 24 volt use.

Are you looking for a good LED bulb that you can replace your original BA15S halogen bulb with? Then this warm white BA15S LED bulb might be exactly what you’re looking for. The bulb has 9 LEDs that shine all around and is supplied per set of 2 pieces. Thanks to the 9 LEDs you get a light output comparable to a 21W halogen bulb. The BA15S LED bulb warm white works on 12 & 24 volt, which means you can use it in your car, truck, camper or trailer for example. Note: to fit, the original bulb must be the same as in image 4. If this doesn’t match, then the LED bulb won’t fit.

To make sure that the BA15S LED bulb warm white is suitable for your vehicle or trailer, we have listed the most important specifications below. This way you can immediately see why this might be the BA15S LED bulb you’re looking for. The bulb has the ECE R10 certification, which means it doesn’t cause interference to your radio signal for example. Moreover, the LED bulb can be used up to 32 volt, which protects it against voltage spikes during starting of your vehicle.

Dimensions:

To make sure you can mount the BA15S LED bulb warm white where you want, we have noted the dimensions below. The dimensions of this warm white LED bulb with bayonet connection are as follows:

• Length: 39 mm
• Width top: 20 mm
• Width bottom: 15 mm

Note, these LED lamps are not CAN-Bus proof. This means that this lamp may trigger a defective lamp warning on your dashboard. This mainly applies to newer car models, trucks are often excluded from this. Additional lamps such as spotlights or skylights are also excluded from the CAN-Bus system.

Other colors:

Are you looking for an r10w or p21w LED bulb, but the BA15S LED bulb xenon white isn’t the color you’re looking for? This LED bulb with bayonet connection is also available in the following colors:

• BA15S LED bulb amber – 9 smd
• BA15S LED bulb xenon white – 9 smd
• BA15S LED bulb red – 9smd

Why this BA15S LED bulb doesn’t have an E-Mark:

Replacement bulbs must comply with European standards for safety, water resistance, and short circuit prevention (ECE R37). These standards are based on old incandescent and halogen bulbs. LED replacement bulbs cannot comply with this because they don’t have a filament. As a result, this LED bulb doesn’t receive the ECE R37 certification and officially cannot be used on public roads. You can safely use this BA15S LED bulb on your own property or, for example, in racing. This way, you get the most out of the bulb without causing legal issues.