BA9S LED light 24 volt yellow – 2 pieces

BA9S LED bulb yellow with 5-smd, for 24 volt use.

Are you looking for an LED bulb that you can exchange for your original BA9S halogen bulb? Then this yellow BA9S LED bulb might be exactly what you are looking for. This bulb has 5 bright LEDs and is supplied in sets of 2. Thanks to the 5 LEDs, it shines all around, so you are immediately assured of good visibility. Moreover, the bulb has a light output comparable to a 5W halogen bulb. The BA9S LED bulb yellow operates on 24 volts, which means that you can use it, for example, in your truck, camper or trailer. Please note: the original bulb must be the same as in image 2, otherwise the LED bulb will not fit.

In addition, the yellow BA9S LED bulb has the ECE R10 mark, which means that it does not cause interference with, for example, your radio signal during use. The bulb can also handle up to 28 volts, so it is protected against peak voltage when starting your vehicle. In short, this is a compact, bright and reliable 24V LED bulb yellow, ideal as interior lighting for your truck, camper or trailer.

Dimensions:

To ensure that you can mount the BA9S LED bulb yellow where you want, we have noted the dimensions below. The dimensions of this yellow LED bulb with bayonet connection are as follows:

• Length: 30mm
• Top width: 11 mm
• Bottom width: 9 mm

Please note, these LED lamps are not CAN-Bus proof. This means that this lamp may cause a faulty lamp notification on the dashboard. This mainly applies to newer car models; trucks are often excluded from this. Additional lamps such as spotlights or skylights are also excluded from the CAN-Bus system.

Other colors:

Are you looking for a T4W LED bulb, but the BA9S LED bulb yellow for 24 volt use is not the color you are looking for? Be aware that the LED bulb with bayonet connection is also available in the following colors:

• Blue
• Green
  
• Red
  
• White

Why the BA9S LED bulb doesn’t have E-Mark:

Replacement bulbs must comply with European standards for safety, waterproofing, and short-circuit prevention (ECE R37). These standards are based on old incandescent and halogen bulbs. LED replacement bulbs cannot meet these standards because they do not have a filament. Therefore, this LED bulb does not receive the ECE R37 certification and is officially not allowed to be used on public roads. You can safely use this BA15S LED bulb on your own property or, for example, in racing. This way, you get the most out of the bulb without causing legal issues.