H11 LED lamp set 12/24 Volt white

H11 LED lamp set, suitable for 12 & 24 volt use.

Are you looking for a good LED lamp to replace your original H11 halogen lamp? Then this H11 LED lamp set might be exactly what you are looking for. The lamp has 2 bright LEDs and is supplied per set of 2. Thanks to the LEDs, the lamp has a light output that you can compare with a 50W halogen lamp. The H11 LED lamp white works on 12 and 24 volts, so you can use it in your car, motorcycle, truck, camper or other vehicle.

To be sure that the lamp fits, you must check whether your original H11 lamp is the same as in picture 3. If this is not the case, the LED lamp will unfortunately not fit. In addition, these H11 LED lamps are equipped with the ECE R10 mark. This means that it does not cause interference during use, for example on your radio signal. The lamp can also handle up to 32 volts, which protects it against peak voltage when starting your vehicle. In short, a sturdy, reliable LED lamp that makes your vehicle more visible and your ride safer.

Light output:

The H4 LED lamp is equipped with 2 hi-power LEDs. Together, these LEDs provide a light output of 1800 lumens per lamp. If you mount a set, it delivers no less than 3600 lumens! That is more than enough to illuminate the road in front of you well. An H11 lamp is often found in the headlight of your car, motorcycle, truck or other vehicle. This way you can be sure that you can always drive clearly and safely, both during the day and at night.

Please note that these LED lamps are in most cases CAN-Bus proof. This means that the lamp will not give a notification on the dashboard. This mainly applies to older models of cars and trucks. Newer vehicles may in some cases receive a notification on the dashboard. Extra lighting such as spotlights or skylights are excluded from this system.

Other versions:

Do you want to purchase an LED lamp set? But you cannot mount the H11 version in your vehicle because you have a different connection? Know that this LED lamp set is also available with the following connections:

• H4 LED lamp set
• H7 LED lamp set
• HB3 LED lamp set
• HB4 LED lamp set

Why this LED lamp doesn’t have E-mark:

Replacement lights must comply with European standards for safety, water resistance, and short circuit prevention (ECE R37). These standards are based on old incandescent and halogen lights. LED replacement lights cannot comply with this because they don’t have a filament. As a result, this LED light doesn’t receive the ECE R37 certification and officially cannot be used on public roads. You can safely use this BA15S LED light on your own property or, for example, in racing. This way, you get the most out of the light without causing legal issues.