Loop LED strip 8mm 3528

Connector for 8mm wide LED strip.

With this connector, you can easily install your LED strip around a corner yourself. This connector prevents your LED strip from breaking when you want to mount it at a right angle. The connector can only be used on LED strips with a width of 8 millimeters. You can recognize these strips by the 3528 LEDs that are mounted. This accessory can be used with 12 and 24 volt. Please note: the connector is not suitable for an RGB LED strip.

Easy to use

Thanks to the plastic click system attached to the cables, installing this accessory is child’s play. Do you have an LED strip with a silicone layer (IP65)? Please note that you must first remove the silicone layer before installation. Do you have an LED strip without a silicone layer (IP33)? Then you can attach this accessory without any difficulty. The connector can only be attached at the pre-indicated locations on the LED strip. The spot where you can cut the LED strip is indicated by a small scissor icon printed on the strip. After cutting, you can easily attach the 8mm connector to both ends of the LED strip.

Other connection options

If you have purchased a type 5050 LED strip, you cannot use this 8mm wide connector. For this, you need to use the 10mm wide connector. You can find the 10mm wide connector for a 5050 LED strip here.