Connector LED strip 8mm 3528

Connector for LED strip 8mm wide.

With this LED strip connector, you can quickly and easily reconnect a cut LED strip without soldering. The connector is suitable for LED strips that are 8mm wide, with 3528 LEDs, and works on 12 and 24 volt. Note: this connector is not suitable for RGB LED strips.

Easy to use

Connect your LED strip quickly and easily with this connector. For strips with a silicone layer (IP65), first remove the silicone layer; for strips without silicone layer (IP33), you can attach the connector directly. Cut the LED strip at the indicated points and attach the cables to the correct positive and negative points to prevent short circuits. For strips from our range, the cutting and connection points are clearly marked. The connector has a 15cm cable so you can easily connect it to your power supply. We always recommend separately fusing any additional lighting or accessories in and around your vehicle.

Want to install the LED strip in a corner or curve? Then use the connector piece. This allows you to install the strip without breaking it in corners or curves. Both accessories are suitable for 3528 LED strips and make reconnecting or repositioning your LED strip much easier.

Other connection options

If you have purchased a type 5050 LED strip, you cannot use this 8mm wide connector! For this, you need to use the 10mm wide LED strip connector. You can find the 10mm wide connector for connecting a 5050 LED strip here.