Strands cable kit with 2x DT2 plug 12V

Strands cable kit with 2x DT2 plug, suitable for 12 volts. 

Have you purchased one or more lamps with a DT2 connection and do you want to use them with a pre-wired switch? Then the Strands cable kit with 2x DT2 plug may be the kit you are looking for. The VDE cable is provided with 3 meters of cable and has one DT2 plug at the end. The volledig waterproof Strands cable kit is equipped with a 12v - 40A relay and is only suitable for 12 volts. This means that you can use the Strands cable kit for example on your car, trailer, tractor or other type of vehicle. Please note, you can also replace the relay for a 24v variant so that you can also use the Strands cable kit for your truck, for example. 

To ensure that the Strands cable kit with 2x DT2 plug is suitable for your vehicle or trailer. We have written out a number of specifications below. All this to make it clear to you why this might be the cable kit you are looking for. The connection cable includes a 1.5mm² cable. The cable thickness ensures that you can connect a lamp that consumes a maximum of 2* 100w. If you remove the DT2 plug, you can connect a maximum of 2* 180w to it.

Other cables: 

Bent u wel op zoek naar een aansluit kabel van het merk Strands? Maar is de kabel kit met 2x DT2 stekker niet waar u naar opzoek bent? Bekijk dan hier de overige kabels die Strands aanbied: 

• Cable kit with 1* DT plug
• DT2 splitter cable

Are you still of the opinion that the Strands cable kit with 2x DT 2 plug is not what you are looking for? Simply because the plug, voltage or cable length is not to your liking? Be sure to take a look at our page fittings and cables† You may find the fitting or cable you are looking for here.