Volvo DRL unit orange 2021+

Volvo FH5 DRL unit orange, for year 2021+. 

Do you want to replace the original white daytime running lights of your Volvo for an orange color? Then this DRL set may be the set you are looking for. The set consists of four LED plates with which you can change both the left and right sides. You can easily replace the originally installed lighting with the orange version. At the bottom of the page you will find the steps you need to follow. The DRL set is only made for a Volvo FH4B - FH5 truck of which the year of manufacture is 2021+. The set is made to fit a Volvo and will therefore not fit in any other brand of truck. The orange color that the Volvo FH5 daytime running lights emit is the same as that of your indicator light.

A set consists of four LED plates. Each PCB is equipped with powerful LED's, which will make the entire module light up. The LED units are exactly the same as the original ones fitted. As a result, replacing the module is done quickly and you do not have to adjust anything in the original lamp. The LED lamp is made of high quality material. This guarantees a long service life. In short, by installing the LED lighting in your Volvo you can be sure that you can hit the road well lit. The Volvo FH5 LED orange daytime running lights do not have an E-mark. That is why you have to reassemble the original one for the MOT. 

Other models: 

Do you have a Volvo FH5 truck, but don't want to change the daytime running lights to the color orange? Then know that this DRL module is also available in other colors. View the other color options below:

• DRL FH5 warm white 2021+ 

Edit:

To install the Volvo FH5 orange daytime running lights, you must follow the following steps. The installation of the DRL module will take about half an hour per headlight.

1. Remove the connector from the existing lighting.
2. Remove the screws securing the original diode holders.
3. Remove the diode holders from the cooling plates.
4. Remove the thermal paste and clean the surface well.
5. Bring the supplied thermal paste in a thin even layer to the cooling plates where the lamp will be mounted.
6. Push the diode holder into the thermal paste and secure it carefully with the original screw.
7. Insert the connector into the new diode holder.
8. The Volvo FH5 daytime running lights are ready for use.

Don't you just want to install the Volvo FH5 orange daytime running lights? But are you looking for more lighting that you can install in or around your Volvo? Then take a look at the page Volvo lighting.