Connector LED strip 10mm 5050

Connector for LED strip 10mm wide.

With this coupling piece you can easily install your LED strip around a corner without breaking the strip. It is suitable for LED strips 8 mm wide with 3528 LEDs and works on 12 and 24 volt. Note: the coupling piece is not suitable for RGB LED strips.

Easy to use

Thanks to the plastic click system on the cables, installation is child’s play. For strips with a silicone layer (IP65) you must first remove the silicone layer; for strips without a silicone layer (IP33) you can attach the coupling piece directly. Attach the coupling piece only at the indicated cutting points of the LED strip. On our LED strips these points are marked with a scissors symbol. Cut the strip at the indicated point and simply click the coupling piece onto the two cut pieces.

Other connection options

If you have purchased an LED strip of type 3528, you cannot use this 10mm wide connector, for this you need to use the 8mm wide LED strip connector. You can find the 8mm wide connector for connecting a 5050 LED strip here.