Connector LED strip 10mm 5050
Beschikbaarheid: In stock
| ordered before 15:00, shipped today |
€1,35 Excl. VAT €1,63 incl. 21% VAT
Connector for LED strip 10mm wide.
With this LED strip connector you can easily reconnect your cut LED strip. This coupling piece ensures that you no longer have to solder your cut LED strip yourself. The connector can only be used on LED strips that have a width of 1 centimeter. You can recognize these LED strips by the 5050 LED's that are mounted. This accessory can be used on 12 and 24 volts. You can NOT use the coupler for an RGB LED strip.
Easy in use
Reconnect your LED strip quickly and easily with our LED strip connector 10mm! This connector is suitable for a LED strip of type 5050 with a maximum width of 10 millimeters. If you have a LED strip with a silicone layer (IP65), you must first remove the silicone layer before using this connector. If you have a LED strip without silicone layer (IP33), you can easily attach it to your LED strip. You can attach the cable to the indicated parts on the LED strip. If you have a LED strip from our range, these points are indicated with scissors. You can cut the LED strip here and reconnect with this accessory. The advantage of this accessory is that you no longer have to solder and thus makes reconnecting a lot easier.
This product can be used for our 12 and 24 volt LED strips. The connector is equipped with 15 centimeters of cable so that you can easily attach it to your power supply. When connecting, make sure that you connect the plus and minus properly, this will prevent a short circuit in your vehicle. We also always recommend that additional lighting or accessories in and around your vehicle be fused separately.
If you do not want to reconnect the LED strip but you want to process it in a corner or bend, use it connector. With this connector you can easily process your LED strip in corners or curves without your LED strip breaking inside. Both accessories can be used with the 5050 LED strip.
Other connectivity options
If you have bought a LED strip of the type 3528 you cannot use this connector of 10mm wide, you should use the 8mm wide LED strip connector for this. You will find the 8-mm connector here.
Er zijn nog geen beoordelingen.