BA15S LED light 24 volt blue – 2 pieces

BA15S LED light blue with 8-SMD, suitable for 24 volt use.

Are you looking for a good LED light to replace your original BA15S halogen lamp? Then this blue BA15S LED light might be exactly what you’re looking for. The light has 8 LED’s and is supplied as a set of 2 pieces. Thanks to the 8 LED’s, you can be sure that the light shines all around. The light output is comparable to a 10W halogen lamp. The BA15S LED light blue only works on 24 volts, making it ideal for your truck, camper, or trailer, for example. Please note: the original lamp must be the same as in image 3. If this does not match, the LED light will not fit.

To ensure that the BA15S LED light blue is suitable for your vehicle or trailer, we have listed the most important specifications for you below. This way, you can immediately see why this might be the LED light you are looking for. The light has the ECE R10 certification, which means it does not cause interference with, for example, your radio signal. In addition, the LED light can be used up to 30 volts, protecting it against voltage spikes that can occur when starting your vehicle. In short: a perfect BA15S 24V LED light blue that you can use, for example, as interior lighting for your truck or trailer.

Dimensions:

To ensure that you can mount the BA15S LED light blue wherever you want, we have noted the dimensions below. The dimensions of this blue LED light with bayonet fitting are as follows:

• Length: 35 mm
• Top width: 16 mm
• Width bottom: 15 mm

Note, these LED lamps are not CAN-Bus proof. This means that this lamp may trigger a defective lamp warning on your dashboard. This mainly applies to newer car models, trucks are often excluded from this. Additional lamps such as spotlights or skylights are also excluded from the CAN-Bus system.

Other colors:

Are you looking for an R5W or R10W LED light, but the BA15S LED light blue for 24 volt use is not the color you are looking for? Then know that the LED light with bayonet fitting is also available in the following colors:

• BA15S 24 volt – warm white 3000k
• BA15S 24 volt – yellow
• BA15S 24 volt – white 5700k
  
• BA15S 24 volt – green
• BA15S 24 volt – red

Why this BA15S LED light doesn’t have an E-Mark:

Replacement lights must comply with European standards for safety, water resistance, and short circuit prevention (ECE R37). These standards are based on old incandescent and halogen lights. LED replacement lights cannot comply with this because they don’t have a filament. As a result, this LED light doesn’t receive the ECE R37 certification and officially cannot be used on public roads. You can safely use this BA15S LED light on your own property or, for example, in racing. This way, you get the most out of the light without causing legal issues.