BA15S LED light 24 volt warm white – 2 pieces

BA15S LED lamp warm white – 3000k with 8-smd, suitable for 24 volt use.

Are you looking for a good LED lamp that you can replace your original BA15S halogen lamp with? Then this warm white BA15S LED lamp might be exactly what you’re looking for. The lamp has 8 LED’s and is supplied per set of 2 pieces. Thanks to the 8 LED’s you can be sure that the lamp shines all around. The light output is comparable to a 10W halogen lamp. The BA15S LED lamp warm white only works on 24 volt, making it ideal for your truck, camper or trailer. Note: the original lamp must be the same as in image 3. If this doesn’t match, then the LED lamp won’t fit.

To make sure that the BA15S LED lamp warm white is suitable for your vehicle or trailer, we have listed the most important specifications below. This way you can immediately see why this might be the LED lamp you’re looking for. The lamp has the ECE R10 certification, which means it doesn’t cause interference with your radio signal, for example. In addition, the LED lamp can be used up to 30 volt, which protects it against voltage spikes that can occur when starting your vehicle. In short: a perfect BA15S 24V LED lamp warm white that you can use, for example, as interior lighting for your truck or trailer.

Dimensions:

To make sure you can mount the BA15S LED lamp warm white where you want, we have noted the dimensions below. The dimensions of this warm white LED lamp with bayonet connection are as follows:

• Length: 35 mm
• Top width: 16 mm
• Width bottom: 15 mm

Note, these LED lamps are not CAN-Bus proof. This means that this lamp may trigger a defective lamp warning on your dashboard. This mainly applies to newer car models, trucks are often excluded from this. Additional lamps such as spotlights or skylights are also excluded from the CAN-Bus system.

Other colors:

Are you looking for an r5w or r10w LED lamp, but the BA15S LED lamp warm white for 24 volt use is not the color you’re looking for? Know that the LED lamp with bayonet connection is also available in the following colors:

• BA15S 24 volt – yellow
• BA15S 24 volt – white 5700k
• BA15S 24 volt – blue
  
• BA15S 24 volt – green
• BA15S 24 volt – red

Why this BA15S LED light doesn’t have an E-Mark:

Replacement lights must comply with European standards for safety, water resistance, and short circuit prevention (ECE R37). These standards are based on old incandescent and halogen lights. LED replacement lights cannot comply with this because they don’t have a filament. As a result, this LED light doesn’t receive the ECE R37 certification and officially cannot be used on public roads. You can safely use this BA15S LED light on your own property or, for example, in racing. This way, you get the most out of the light without causing legal issues.