Loop LED strip 10mm 5050

Connector for 10mm wide LED strip.

With this connector, you can easily process your LED strip in a corner without breaking the strip. It is suitable for 10 mm wide LED strips with 5050 LEDs and works on 12 and 24 volt. Please note: the connector is not suitable for RGB LED strips.

Easy to use

Thanks to the plastic click system on the cables, assembly is very easy. For strips with a silicone layer (IP65), you must first remove the silicone layer. For strips without a silicone layer (IP33), you can attach the connector directly. You only attach the connector to the indicated cutting points of the LED strip. On our LED strips, these points are indicated with scissors. Cut the strip here and simply click the connector onto the two cut pieces.

Other connection options

If you have purchased an LED strip of type 3528, you cannot use this 10mm wide connector; you must use the 8mm wide connector for this. You can find the 8-mm wide connector for a 5050 LED strip here.