MAN DRL unit 2014+ orange

MAN TG1 DRL unit orange.

Do you want to replace your original white LED daytime running lights of your MAN TG1 with an orange color? Then this DRL set might be the set you are looking for. This set consists of two LED plates with which you can change both the left and right module. You can easily replace the originally mounted lighting with the orange variant. At the bottom of the page you will find the steps you need to follow for this.

Because you want to know before you buy that the set is suitable for your truck, we have listed a number of important points here. It is important that the originally mounted units are exactly the same as those shown in image two. If the originally mounted unit does not match, this replacement lamp will not fit. Furthermore, the MAN TG1 daytime running light orange is only suitable for models from 2014+. Please note, the DRL unit does not have an E-mark, this means that you must remount the original for the MOT. 

Other models: 

Do you have a MAN TGS, TGA or TGX truck, but you don't want to change the daytime running lights to orange? Or do the units not match those shown in the photo? Then know that this DRL module is also available in other colors and models. View the other options below:

• MAN TG2 LED DRL orange 2017+
• MAN TG3 LED DRL orange 2021+
  
• MAN TG3 LED DRL w-white 2021+

Installation:

Follow the steps below to install the MAN TG1 daytime running lights. The installation of the orange DRL unit will take about half an hour per headlight. Figure 4 shows an example of how the set will eventually light up after installation.

1. Remove the connector from the existing lighting.
2. Remove the screws securing the original diode holders.
3. Remove the diode holders from the cooling plates.
4. Remove the thermal paste and clean the surface well.
5. Bring the supplied thermal paste in a thin even layer to the cooling plates where the lamp will be mounted.
6. Push the diode holder into the thermal paste and secure it carefully with the original screw.
7. Insert the connector into the new diode holder.
8. The lighting of your MAN TG1 is ready for use.

Don't you just want to replace the orange daytime running lights of your MAN TG1? But are you looking for more LED lighting that you can install in or around your MAN truck? Then take a look at the page MAN lighting.