DRL unit MAN 2020+ orange

DRL unit ORANGE, suitable for a MAN TG3.

Do you want to replace your original white LED daytime running lights of your MAN TG3 with an orange color? Then this DRL set might be the set you are looking for. This set consists of two LED plates with which you can change both the left and right module. You can easily replace the originally mounted lighting with the orange variant. At the bottom of the page you will find the steps you need to follow for this.

Because you want to know before purchasing that the set is suitable for your truck, we have written down a number of important points here. It is important that the originally mounted units are exactly the same as those shown in image two. If the originally mounted unit does not match, this replacement lamp will not fit. Furthermore, the MAN TG3 daytime running light orange is only suitable for models from 2020+. Please note, the DRL unit does not have E-mark, this means that you must reassemble the original for the MOT. 

Other models: 

Do you have a MAN TGS, TGA or TGX truck, but you don't want to change the daytime running lights to orange? Or do the units not match those shown in the photo? Then know that this DRL module is also available in other colors and models. View the other options below:

• MAN TG1 LED DRL orange 2012+
• MAN TG2 LED DRL orange 2021+
  
• MAN TG3 LED DRL w-white 2021+

Installation:

Follow the steps below to install the MAN TG3 daytime running lights. The installation of the orange DRL unit will take approximately half an hour per headlight. Figures 3 and 4 show an example of how the set will eventually light up after installation.

1. Remove the connector from the existing lighting.
2. Remove the screws securing the original diode holders.
3. Remove the diode holders from the cooling plates.
4. Remove the thermal paste and clean the surface well.
5. Bring the supplied thermal paste in a thin even layer to the cooling plates where the lamp will be mounted.
6. Push the diode holder into the thermal paste and secure it carefully with the original screw.
7. Insert the connector into the new diode holder.
8. The lighting of your MAN TG3 is ready for use.

Don't you just want to replace the orange daytime running lights of your MAN TG3? But are you looking for more LED lighting that you can install in or around your MAN truck? Then take a look at the page MAN lighting.