Coupler RGB LED strip 10mm 5050

By using this accessory you can easily process the RGB LED strip that you have purchased. The connector ensures that you do not have to stick the RGB LED strip tightly in a corner, thus preventing the LED strip from malfunctioning in the corners. This accessory can be used for the 12-volt and 24-volt RGB LED strips.

Easy in use

The plastic click system that is attached to the cables makes mounting this accessory child's play. If you have a LED strip with a silicone layer (IP65), you must first remove the silicone layer before mounting. If you have a LED strip without silicone layer (IP33) you can attach this accessory without any effort. The accessory can only be attached in the pre-specified places on the LED strip. The place to cut the LED strip is indicated on our LED strips by scissors printed on the strip, after cutting the RGB LED strip you can easily attach the coupling piece to both cut pieces.

No RGB LED strip

If you have purchased a solid color LED strip of the type 5050, you cannot use this 10 mm wide connector, because this connector can only be used for an RGB LED strip. You will find the connector for a single color LED strip here.