Volvo DRL unit warm white 2015+
Beschikbaarheid: In stock
| ordered before 14:30, shipped today |
€160,00 Excl. VAT €193,60 incl. 21% VAT
Volvo DRL unit warm white - 3000K, for year 2015 - 2021.
Do you want to replace the original white mounted daytime running lights of your Volvo for the warm white - 3000k variant? Then this DRL set may be the set you are looking for. The set consists of four LED plates with which you can change both the left and right side. You can easily replace the original mounted lighting for the orange version. At the bottom of the page you will find the steps you need to follow. The DRL set is only made for a Volvo FM, FH4 and FH16 truck of which the year of manufacture is 2015+. The set is made to fit a Volvo and will therefore not fit in any other brand of truck. The color emitted by the Volvo DRL unit is the same as that of a halogen lamp.
A set consists of four LED plates. Each PCB is equipped with powerful Cree LED's, which will ensure that the entire module lights up. The LED units are exactly the same as the original ones fitted. As a result, replacing the module is done quickly and you do not have to adjust anything in the original lamp. The LED lamp is made of high quality material. This guarantees a long service life. In short, by installing the LED warm white daytime running lights in your Volvo, you can be sure that you can hit the road well lit. The Volvo FH4 LED warm white daytime running lights do not have an E-mark. That is why you have to reassemble the original one for the MOT.
Do you have a Volvo FH4 truck, but don't want to change the daytime running lights to warm white? Or do the units not match those shown in the photo? Then know that this DRL module is also available in other colors and models. View the other options below:
To install the warm white daytime running lights in your Volvo truck, you must follow the following steps. The installation of the LED lighting will take about half an hour per headlight. Figure 3 shows an example of how the set will eventually light up after installation.
- Remove the connector from the existing lighting.
- Remove the screws securing the original diode holders.
- Remove the diode holders from the cooling plates.
- Remove the thermal paste and clean the surface well.
- Bring the supplied thermal paste in a thin even layer to the cooling plates where the lamp will be mounted.
- Push the diode holder into the thermal paste and secure it carefully with the original screw.
- Insert the connector into the new diode holder.
- The lighting of your Volvo FH4 is ready for use.
Don't you just want to replace the white daytime running lights of your Volvo FH4? But are you looking for more LED lighting that you can install in or around your Volvo? Then take a look at the page Volvo lighting.
Warm white, Black
3000K – Warm White
|Type of lighting
Daytime running lights
Daytime running lights, City lights
|Number of LED's
2 LED & #039; s, 3 LED & #039; s