T10 LED lamp warm white 9/32V - 2 pieces
Beschikbaarheid: In stock
| ordered before 15:00, shipped today |
€12,60 Excl. VAT €15,25 incl. 21% VAT
T10 LED lamp warm white 3000k, suitable for 12 & 24 volt use.
Are you looking for a bright and good 3000K white LED lamp that you can exchange for your original mounted T10 halogen lamp? Then this T10 LED lamp warm white may be the lamp you are looking for. The LED lamp is equipped with 5 LED's and is supplied per set of 2 pieces. Because of the 5 LED's you are assured that the lamp will shine all around. The LED lamp has a light output that can be compared with a 10w halogen lamp. The T10 LED lamp warm white can be used on 12 & 24 volts. This means that the halogen white LED lamp is, for example, suitable for your car, truck or other type of vehicle. To ensure that the T10 LED lamp fits warm white, the original lamp fitted must be the same as that shown in picture 4. If it does not match, the LED lamp will not fit.
To make sure that this T10 LED lamp warm white is suitable for your vehicle or trailer, we have written a number of specifications below. All this to make it clear to you why this might be the T10 LED lamp you are looking for. This LED lamp has, among other things, the ECE R10 quality mark. This quality mark means that the lamp will not cause any interference during activation, for example on your radio signal. The LED lamp can also be used up to 32 volts, which means that the LED lamp is protected against peak voltage that can occur when starting your vehicle. In short, the LED lamp is perfect to use as side light or interior lighting of your car or truck.
Installation of the T10 LED lamp:
To install the T10 LED lamp warm white in your vehicle, please follow the following steps:
- Switch off the lighting of your vehicle.
- Remove the old halogen lamp from the holder.
- Place the T10 LED lamp in the holder.
- Turn on your vehicle's lights and check if the LED bulb works. If the lamp does not work, turn the lamp a quarter turn.
- The lighting is now ready for use.
Please note, these LED lamps are not CAN-Bus proof. This means that this lamp can report a defective lamp on your dashboard. This mainly applies to newer models of cars, trucks are often excluded. Additional lamps such as spotlights or skylights are also excluded from the CAN-Bus system.
Are you looking for a w5w LED lamp, but the T10 LED lamp warm white for 12 & 24 volts is not the color you are looking for? Then know that the plug-in LED lamp is also available in the following colors:
- Plug-in LED lamp clear white 12/24v
- Plug-in LED lamp orange 12/24v
- Plug-in LED lamp blue 12/24v
- Plug-in LED lamp red 12/24v
Why does this T10 LED lamp not have an E-mark:
Replacement lamps must comply with European standards regarding safety, watertightness and the prevention of short circuits (ECE-R37). These standards are based on the incandescent and halogen lamps of the past. LED replacement lamps cannot meet those standards. The reason is because there is no filament in it. As a result, this LED lamp does not receive the ECE R37 quality mark and can therefore officially not be used on public roads. You can use this T10 LED plug-in lamp warm white 12/24 volts on, for example, your own terrain or in racing.
3000K (warm white)
|Type of lighting||
Interior lighting, License plate lighting, Sidelight
|Number of LED's||
Er zijn nog geen beoordelingen.