Shopping cart

T10 LED green 24V (10 pieces)

Beschikbaarheid: In stock

| ordered before 14:30, shipped today |

T10 led lamp green 24V - value pack 10 pieces - for 24 volt use - EAN: 6090537331337
T10 led lamp green 24V - value pack 10 pieces - for 24 volt use - EAN: 6090537331337 ADL50510-G - T10 LED bulb green - EAN: 6090537331337 Original mounted T10 halogen lamp 5w5 - replaceable for T10 LED green - 24 volts - EAN: 6090537331337

€14,00 Excl. VAT €16,94 incl. 21% VAT

Beschikbaarheid: In stock

T10 led lamp green 24V - value pack 10 pieces - for 24 volt use - EAN: 6090537331337
T10 LED green 24V (10 pieces)

€14,00 Excl. VAT €16,94 incl. 21% VAT


T10 LED lamp green, suitable for 24 volt use. 

Are you looking for a budget-friendly LED lamp that you can exchange for your original mounted T10 halogen lamp? Then this green T10 LED lamp may be the lamp you are looking for. The LED lamp is equipped with 5 LED's and is supplied per set of 10 pieces. The 5 LEDs ensure that the lamp will shine all around. This LED lamp has a light output that you can compare with a 5 watt halogen lamp. The T10 LED lamp green can only be used on 24 volts. This means that you can use this LED lamp for example in your truck, camper or trailer. To ensure that the green LED bulb will fit, the bulb originally fitted must be exactly the same as that shown in Figure 3. If it doesn't match, the LED bulb will probably not fit.

To make sure that this T10 LED lamp green is suitable for your vehicle or trailer, we have written a number of specifications below. All this to make it clear to you why this might be the T10 LED lamp you are looking for. This LED lamp has, among other things, the ECE R10 quality mark. This quality mark means that the lamp will not cause any interference during activation, for example on your radio signal. The LED lamp can also be used up to 28 volts, which means that the LED lamp is protected against peak voltage that can occur when starting your vehicle. In short, this is a great LED replacement lamp that can serve as interior lighting for your truck or trailer. 

Installation of the T10 LED lamp:

To install this T10 LED lamp green 24v you need to follow the following steps:

  1. Switch off the lighting of your vehicle.
  2. Take out the old 5W5 (image 3) halogen bulb.
  3. Place the T10 LED lamp green in the holder.
  4. Switch on the lighting of your vehicle and check if the LED lamp works. The lamp does not work? Then turn it a quarter turn.
  5. The lighting is now ready for use.

Please note, these LED lamps are not CAN-Bus proof. This means that this lamp can report a defective lamp on your dashboard. This mainly applies to newer models of cars, trucks are often excluded. Additional lamps such as spotlights or skylights are also excluded from the CAN-Bus system. 

Other colors:

Would you like to take advantage of the advantage packaging? But isn't the T10 lamp in the color green what you are looking for? View the other available colors below:

Why does this T10 LED lamp not have an E-mark:

Replacement lamps must meet European standards for safety, water tightness and short circuit prevention (ECE-R37). These standards are based on the incandescent and halogen lamp of the past. LED replacement lamps cannot meet those standards. The reason is because there is no filament in it. As a result, this LED lamp does not receive the ECE R37 quality mark and may therefore not be used officially on public roads. You may use this 24v T10 LED lamp green on, for example, your own terrain or in racing.


Gewicht 0,020 kg




24 volt



Color LED



10 pieces



Lamp socket



T10 5W5



Type of lighting

Interior lighting

Number of LED's

5 LED's


Not waterproof










6 Months



Er zijn nog geen beoordelingen.

Be the first to review “T10 LED groen 24V (10 stuks)”

Your email address will not be published. Required fields are marked *

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.